home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
TD on CD Volume 4 #2
/
TD on CD (Volume 4, Issue 2) (USA).bin
/
README.TXT
< prev
next >
Wrap
Text File
|
1998-04-23
|
6KB
|
185 lines
************************************
TDonCD READ ME
VOLUME 4, ISSUE 2
************************************
TOPICS:
Minimum requirements
Network installation
Uninstalling TDonCD
Updating path information
Reindexing error
Printer problems
DLL conflicts
Incompatible items list
Updating prices on Windows 3.1 systems
Minimum requirements
--------------------
- 486 IBM compatible PC
- 8MB RAM
- Windows 3.1 or later
- Pointing device (mouse)
- Double-speed or faster CD-ROM drive
- 256 color monitor display
- 10K of hard disk space
Note: This very limited use of hard disk space is possible
only if you choose a custom installation and clear all
check boxes on the "Select TDonCD Components" list.
This is not a recommended installation because you cannot
do any of the following:
-Update or export product information
-Add databases to SourceMaster
-Customize the Electronic Catalog for your customers
-Make Electronic Catalog on Disk installation sets
-Establish discount codes
-Specify price-rounding instructions
If you are using a 16-bit Windows system, reading
from the CD to start the Electronic Catalog might take
5 minutes or more and can cause system lockup.
Normal use of the CD requires that you install at least
the Electronic Catalog, which uses 47MB of hard disk
space.
Network installation
--------------------
To install TDonCD on a network, follow these steps:
Note: If you have a virus scan software package loaded, it can
interfere with the installation of TDonCD. To avoid this
problem, turn off the virus scan software. After the
installation is complete, you can turn it back on. See
your virus software manual for specific instructions.
1. Install TDonCD to any network drive.
2. Copy the TDCD.INI file from the first TDonCD installation
to the "Windows" directory of each computer that is to
use TDonCD.
3. Edit each TDCD.INI file to ensure that the "UserDataPath="
statement points to the correct data directory.
4. Give shared READ/WRITE access to all users who are going
to run the networked version of TDonCD. If you selected a
space saving installation as part of step 1, users also
need shared READ access to the CD_ROM drive where you
keep the CD.
Uninstalling TDonCD
---------------------
The Uninstall option removes only the current installation. Pre-
vious versions of TDonCD are not affected if you have saved
them in a different directory. You can uninstall TDonCD by click-
ing either the Uninstall TDonCD icon or the Uninstall TDonCD
option on the Start menu.
Updating path information
-------------------------
If you have moved or renamed files or directories installed by
TDonCD, you need to update the TDonCD path information record.
To update the record for data files in the Electronic Catalog, use
the PATHS option on the SETUP menu in the Electronic Catalog. See
the Electronic Catalog Help system for more information.
To update the record for the Electronic Catalog itself or other
TDonCD programs, Click SETUP at the bottom of the TDonCD main
screen, then click Advanced Options in the dialog box that
appears.
Reindexing error
-----------------
If you experience a re-indexing problem with a network instal-
lation of TDonCD, first check to see that the application is
installed correctly. TDonCD must have full READ, WRITE, and
SHARE privileges when installed on a network. See the
"Network installation" section for more information.
Printer problems
----------------
If you are using an HP LaserJet 4 printer and receive a "NOT A
GRAPHICAL DEVICE" error, replace the existing printer driver
with the HP LaserJet Series II printer driver.
If the proper driver is not listed, you must add it to the
printer options list first. See your Windows manual for
specific instructions.
DLL conflicts
-------------
If TDonCD shows "unusual" responses, check to see that the follow-
ing ".dll" files are in your WINDOWS\SYSTEM directory. If the
files listed are present, compare their dates. If the dates are
different, call TD InterAct Support at 1(800)222-7926.
TDB DLL 359,936 06-18-96
CTL3D DLL 26,000 09-16-94
FTS DLL 20,512 06-18-96
MFC250 DLL 298,240 11-23-93
CTL3DV2 DLL 26,992 04-22-96
Incompatible items list
-----------------------
- Headland Video card with Windows SVGA driver
(use the Headland driver)
- ATI Accelerator Video card
(use standard Windows video drivers)
- Boca Votec Video card
(use standard windows video drivers)
- OS/2 operating system
- Windows NT operating system
- Mac operating system
Updating prices on Windows 3.1 systems
--------------------------------------
If your operating system is Windows 3.1, you cannot use the
update.bat file to import new data into the Electronic Catalog.
Follow these steps to update your prices on a Windows 3.1 system:
1. If the Electronic Catalog is running, close it.
2. Run the prodcod.exe file. You can do this from the Program
Manager Run command or by double-clicking on the file
in the Windows File Manager. See your operating system
manual for instructions.
3. When the update process is complete, restart the
Electronic Catalog and click Reindex on the Setup menu.
A message gives an estimate of how long the process will
take and asks if you want to proceed.
Click NO to postpone the process or YES to proceed.
Note: Reindexing requires exclusive file access. If you decide
to proceed, be sure no other users are running the
Electronic Catalog. Do not use the Electronic Catalog
without reindexing the data and do not stop the reindex-
ing process after it has begun. Doing so can corrupt your
data and require a complete reinstallation of TDonCD.
4. When the reindexing is complete, the Electronic Catalog
displays the updated information whenever you look up a
product.
Note: SourceMaster uses the same data files for Tech Data
products, but you must refresh the SourceMaster data
first. See the SourceMaster online Help for details.